Fantoni USA

Glass wall systems

I-WALL integrated wall system, includes aluminium framing, glazing, doors and hardware, acoustical wall panels and complete installation.
 

225 Crossroads Blvd #199
Carmel, CA 93923


info@fantoniusa.com
fantoniusa.com
(888) 692-7377


I-Wallspace

Integrated wall system. I-Wallspace is a partition wall system born to invite original design: With glass as the signature material, it integrates easily with Fantoni's radiant and sound-absorbing systems, providing total design and creative freedom to produce full and complete solutions.

For more contemporary spaces, the real focus is on glass and its unique qualities: transparency and brightness make for an innovative partition, a single full-height pane light with a concealed profile sunk into the floor or ceiling. Without making spaces feel cramped, the system offers separate and discreet areas, which nonetheless remain in close contact with the rest of the working environment.

This vision of architecture determines the quality of the space, freeing it from the rigid confines of walls, and instead designing and dividing it with light, bright, mdynamic structures.


The I-Wallspace partitioning system provides mthe perfect blend of technical requirements and aesthetic excellence: its design is versatile, it can be accessorized and structured to include cable runs and can be complemented by sound-absorbing systems.

The system can easily be integrated with any type of ceiling and wall, using frame sections concealed within a floating floor or counterceiling. This innovation makes it possible to house acoustic partitions, forming a barrier to increase soundproofing levels by up to 41dB.

Climacoustic

This radiant, sound-absorbent modular system is the only one in the world to combine thermal comfort, energy efficiency, sound quality and innovative design: a single solution to save energy and improve the liveability of any space.  Climacustic® can be used on walls or ceilings, for heating or cooling.  The MDF modules feature a melamine finish:on the rear is a PeRT tubing fluid circuit, and the panels are attached to a 35-mm insulating layer in EPS, bonded using an aluminium sheet. The rapid installation procedure uses the aluminium structures attached to the wallor ceiling, and does not require adhesives or resins. Unlike plasterboard systems, these modular panels (60x60/120) offer easy access for inspection purposes.  The thermal profile achieved in the roomusing the ceiling panels is extremely close to the ideal curve.  A radiant heating ceiling typically exchanges heat with the floor below, which is the surface area with the most favourable exposure, and when running regularly, the air temperature profile is uniform from the floor,  which is normally 1.0-1.5 °C warmer than the air temperature, up to some 5-6 cm from the ceiling.  This top layer of air then expresses the entire temperature gradient between the general air temperature and that of the surface of the ceiling.  An equivalent phenomen on is also seen incooling systems, in addition to which the layer of air in contact with the ceiling cools and drops down, thus adding a convective component to the temperature exchange by radiation, and increasing thermal energy exchange.Climacustic® contributes towards at is fying prerequisites and credits under LEED®.